SGW BYPASS PLUG (ALFA ROMEO GIULIA/STELVIO 2.0L - JEEP WRANGLER JL 2.0L)
SGW BYPASS PLUG (ALFA ROMEO GIULIA/STELVIO 2.0L - JEEP WRANGLER JL 2.0L)
SGW BYPASS PLUG (ALFA ROMEO GIULIA/STELVIO 2.0L - JEEP WRANGLER JL 2.0L)
SGW BYPASS PLUG (ALFA ROMEO GIULIA/STELVIO 2.0L - JEEP WRANGLER JL 2.0L)
SGW BYPASS PLUG (ALFA ROMEO GIULIA/STELVIO 2.0L - JEEP WRANGLER JL 2.0L)
Click to zoom in

SGW BYPASS PLUG (ALFA ROMEO GIULIA/STELVIO 2.0L - JEEP WRANGLER JL 2.0L)

ENGINE
$59.95
$59.95

SGW BYPASS PLUG (ALFA ROMEO GIULIA/STELVIO 2.0L - JEEP WRANGLER JL 2.0L)

New model, and fully unlocked features! Beginning with model years 2018 and above Alfa Romeo/Fiat/Jeep vehicles are equipped with a new device called a security gateway module. The purpose of this module is to prevent CAN bus hacking over the G or LTE network. This Bypass plug allows you to bypass this module. This unit is required to access the Body control module, infotainment system, and the ECM. This is also required to be used with our Euro+Drive Tuning system for vehicles produced 2018+.

APPLICATIONS:

  • (ALL) Alfa Romeo Giulia 2.0L ( Manufactured 02/2018+)
  • (ALL) Alfa Romeo Stelvio 2.0L (Manufactured 02/2018+)
  • (ALL) JEEP WRANGLER JL 2.0L

NOTE: This SGW Module is located above the OBD2 port and can be accessed by reaching through the opening below the steering wheel. Simply disconnect the two connectors running into the SGW module and plug them into the bypass module. It is recommended to remove the bypass before going in for service/warranty work.

 

INSTALLATION & INFO: HERE

  • Localize where the SGW module is installed in your car and gain access to it
    by removing all the covering panels. Disconnect the car battery. Unplug the
    car loom plugs connected to the SGW module (press lock; do not pull cables
    but via plug; some plug types used by FCA sit very tight in SGW), and plug
    them into the SGW bypass device. Reconnect the car battery. At this stage a
    full access from OBD diagnostic tools is available.

*ALFA ROMEO NOTE:

  • FCA cars after each battery disconnecton will display a lot of messages on
    instrument cluster related with need of self-check of electronic systems. Ignore
    this, to clear start engine, rotate steering wheel to left and right end positions,
    then rotate to middle position and switch off engine. No more messages should
    appear.

 

Read More
Read Less

Customer Reviews

Customer Reviews

Based on 10 reviews
90%
(9)
10%
(1)
0%
(0)
0%
(0)
0%
(0)
R
Raymond Acosta
Works like it should

Works on the car perfectly. A must if you work on your car

S
Sergio Blasco
Giulia 2.0 SGW bypass

5 minutes installation. Works like a charm. Maintenance reset works perfect.

D
DC
Plug and Play

Easy enough to install, wish the install document had clearer/color pictures but you can find better instructions of model specific forums. No issues using MECUScan after install.

A
Aldane Morgia
Works as Advertised!

I needed to do a proxi alignment for a 2018 Giulia QV after adding GTA tail lights. I now also have the ability to read and clear codes.

E
Eric Malone
Life saver

This a must have if you want to work on your Alfa Romeo Giulia your self!

We use cookies to improve your experience on our website. Read about how we use cookies in our Privacy Policy. By browsing this website, you agree to our use of cookies. privacy policy
accept

Your cart

×