V2 AIR INDUCTION SYSTEM (ALFA ROMEO GIULIA/STELVIO 2.0L)

INTAKE SYSTEM
$489.99
$489.99

EUROCOMPULSION® is pleased to present the V2 Air Induction System (Intake) for the ALFA ROMEO GIULIA/STELVIO 2.0L Turbo. The V2 Induction Kit replaces the entire factory intake system/airbox in favor of a dual-air high flow cone filter element, utilizing our premium 4ply Silicone with KEVTEK reinforcement and construction.

Our V2 uses larger diameter transitions over the stock intake piece for increased air volume and flow. A stepped design at the turbo inlet side maintains laminar flow and reduces turbulence. The smoothed interior walls and extremely low thermal conductivity of our silicone will provide cooler and denser air to the turbo inlet increasing engine efficiency and power output. This design utilizes high-pressure ram air from the factory ducting to deliver fresh air directly to the filter while maintaining factory-provided inertial separation for debris and other unwanted materials in the filter media. Decreased restrictions allow for higher flow volume and significantly reduced pressure loss. The V2 design also allows for much louder turbo noises and audible whooshes. 

The dual inlet high flow air filter uses advanced filter media that improves flow by an average of 10-12%. Our filter material uses a steel wire reinforced double-layer cotton mesh with deeper pleats than the average cone. 

This as well as our other available Intakes are perfectly paired and designed with our Euro+Drive® Tuning System in mind.

FEATURES:

  • Increased Power Output
  • Reduced Air Intake Temperatures
  • Increased Air Density at the turbo Inlet
  • Reduced Pressure Losses in the intake tract
  • Increased diameter transitions for more air volume
  • Stepped turbo inlet design for increased laminar flow and decreased turbulence
  • Maintains all factory emissions and vacuum routing
  • Easy Installation, no alteration to vehicle required
  • Will NOT trigger Check Engine Lights
  • New Machined EVAP Venturi, W05 Compatible, NO CELS
  • Increased Aesthetics
  • Uses Dual Air High Flow Air filter, advanced filter media, and filtration
  • Easily reversible
  • Includes all necessary Clamps, Fittings, and Hoses
  • World Wide Fitment for the Giulia/Stelvio 2.0L Petrol (Gasoline Engines)

 

APPLICATION:

  • Alfa Romeo Giulia 2.0L Turbo (2017-2020)
  • Alfa Romeo Stelvio 2.0L Turbo (2017-2020

    TECHNICAL INFO/DYNO CHARTS: HERE

    INSTALLATION INSTRUCTIONS: HERE

    ALUMINUM VENTURI INSTALL: HERE

    INSTALLATION VIDEO (supplemental to written instructions)

    3RD PARTY INSTALL VIDEO (THANKS R&D GARAGE!)

    INTAKE SOUNDS & NOISES VIDEO

    Read More
    Read Less

    Eurocompulsion cannot guarantee the success or stated power gains while using modifications not tested in house or recommended. When testing results, always follow proper dyno procedures, use appropriate fuel, and compare to vehicle specific stock deltas. Eurocompulsion is not responsible for damage caused by or incurred by other modifications or user error/installation error by user or third party. Off-Road & Race Use Only. “Not legal for sale for, or use on, pollution-controlled vehicles.” “Legal only for racing vehicles which may never be used upon a highway. Not applicable or intended for street or highway use.”

    Customer Reviews

    Customer Reviews

    Based on 31 reviews
    100%
    (31)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    R
    Rex Sigo

    Easy install and works and sounds well

    K
    Kevin Castro
    Awesome performance.

    This intake really makes some noise when you're flooring it - turbo whistle, vacuum, boost dump, but quiet when driving normally. It's definitely reduced throttle lag and the cabin engine noise is a little louder (but not obnoxious).

    Install was straight forward, although the instructions and the video should make it clear that pulling the stock airbox out of the Stelvio is a pain. I trimmed the stock air duct so it feeds directly into the filter, rather than removing it.

    overall performance is definitely improved, and I gained 1 mpg.

    J
    Jason Pomeroy
    Great Product! Easy Installation!

    I purchased the V2 intake system for my sons 2020 Giulia based on the high reviews I found online. This is a quality product and my son and I cannot believe what a great sound. It adds to the car. The installation video made it easy for my son and I to do this small project together which made it a great experience. I highly recommend this.

    A
    Alessandro Macri

    My honest opinion is that it’s great, I have a custom catback exhaust and together they sound amazing, you really hear that turbo spool up and then release.

    M
    Marlon Johnson
    My v2 Intake

    Listen .. this is the best DIY you can get for your Alfa . Oh my days ! Simple and fast … the sound ? Weather blow off ? .. I won’t say much . I don’t wanna spoil it for . It took 3 days to get to me .

    We use cookies to improve your experience on our website. Read about how we use cookies in our Privacy Policy. By browsing this website, you agree to our use of cookies. privacy policy
    accept

    Your cart

    ×