PTP TURBO BLANKET (FIAT 500 ABARTH/FIAT 500T) - EUROCOMPULSION
PTP TURBO BLANKET (FIAT 500 ABARTH/FIAT 500T) - EUROCOMPULSION
PTP TURBO BLANKET (FIAT 500 ABARTH/FIAT 500T) - EUROCOMPULSION
PTP TURBO BLANKET (FIAT 500 ABARTH/FIAT 500T) - EUROCOMPULSION
PTP TURBO BLANKET (FIAT 500 ABARTH/FIAT 500T) - EUROCOMPULSION
PTP TURBO BLANKET (FIAT 500 ABARTH/FIAT 500T) - EUROCOMPULSION
PTP TURBO BLANKET (FIAT 500 ABARTH/FIAT 500T) - EUROCOMPULSION
PTP TURBO BLANKET (FIAT 500 ABARTH/FIAT 500T) - EUROCOMPULSION
PTP TURBO BLANKET (FIAT 500 ABARTH/FIAT 500T) - EUROCOMPULSION
PTP TURBO BLANKET (FIAT 500 ABARTH/FIAT 500T) - EUROCOMPULSION
Click to zoom in

PTP TURBO BLANKET (FIAT 500 ABARTH/FIAT 500T)

PTP
HEAT MANAGEMENT
$144.95
$144.95

PTP Turbo Blankets for the Fiat 500 Abarth and Fiat 500T isolate the heat produced by your turbocharger with the purpose of reducing turbo lag, cooler air intake temperatures, protecting and prolonging vital under hood components (up to 60% under hood heat reduction), and giving a boost in horsepower.

In keeping the exhaust gases within the turbocharger hot, turbocharger efficiency is improved. Also by keeping the heat of the exhaust gases contained within the hot side of the turbocharger and away from the cool side of the turbocharger and the intake path, more oxygen per unit volume reaches the engine, and thus, more power can be achieved.

The PTP Fiberglass Turbo Blankets are constructed with a silicone impregnated fiberglass outer layer (Rated 600°F Direct Heat / 1100°F Radiant Heat) and internally insulated with high temperature calcium magnesium silicate wool (Rated 1832°F Continuous / 2300°F Peak) overlaid with a high temperature stainless steel mesh for increased durability and improved thermal resistance.

The PTP Lava Turbo Blankets are constructed with an outer layer made from pulverized volcanic lava rock (Rated 1800°F Direct Heat / 2500°F Radiant Heat) formed into fabric and woven into a tight mesh weave. The Lava Turbo Blankets are internally insulated with high temperature calcium magnesium silicate wool (Rated 1832°F Continuous / 2300°F Peak) overlaid with a high temperature stainless steel mesh for increased durability and improved thermal resistance. The Lava Turbo Blankets are designed to withstand the harshest of conditions.

 Every PTP Turbo Blanket is hand-crafted in North America, and quality is guaranteed. PTP Turbo Blankets is well known in the heat insulation industry for its high standards for material selection, design, and construction. Our materials are on the cutting edge of heat insulation technology. With the growing amount of imitation turbo blankets on the market, it's important to note many of them are manufactured using inferior materials for construction. Imitation turbo blankets can be ineffective, or worse, they can be dangerous if flammable materials are used.

FEATURES: 

  • Greatly Reduced Under-hood Temperatures
  • Improved Under-hood Aesthetics
  • Improved turbo charger Efficiency

APPLICATIONS:

  • (ALL) Fiat 500 Abarth & Fiat 500T
Read More
Read Less

Customer Reviews

Customer Reviews

Based on 7 reviews
57%
(4)
43%
(3)
0%
(0)
0%
(0)
0%
(0)
V
Vince
Great product! Looks and works amazingly.

Got the Lava one. Trying to install the blanket was a bit of a nightmare as 2 of the holes didn’t quite line up, so I had to force it over the stud and that was not easy! But anyway, I did it! And I love it. Looks great. Works great!

E
Evan Blair
Huge difference

Installed the turbo blanket, didn’t take long at all, I didn’t think it would make much of a difference with internal temps but it rly does. After a few minutes with my car off after beating on it, I can set my hand on the blanket itself for an extended period of time. Gotta say, one of the best cheap mods for decreasing internal temps. Ps be careful on the bottom studs, I snapped both and had to replace them :3

T
Tyler G.
Looks Nice/Fits Great

Very nice replacement for the factory heat shield. Lava color looks very clean. Thanks Eurocompulsion!

D
Daniel Banks
Heat and Longevity

The lava blanket looks amazing and works very well. Before when I went to look at anything under the hood after a short drive it was extremely hot and heat soak was everywhere, now though I can actually get under there as the temps are much more manageable.

Install was a bit tight to get to the lower 2 studs like another review mentioned, but it's doable and definitely worth the effort. Engine bay looks a lot cleaner now. Also, with the turbo no longer heat soaking all the engine components I expect they should last a bit longer and I'll run into less headaches down the road.

G
Grant Shoffstall
This mod is a MUST!

This mod not only helps the engine perform better, but it also helps control the heat inside the engine and prevents it from heat soaking. Installing it is fairly straight forward, though be cautious of the front two studs holding in the heat shield. Other than that, I fully recommend this mod! There is also an install video up to help anyone with the installation process https://youtu.be/TxIIaYizbag

We use cookies to improve your experience on our website. Read about how we use cookies in our Privacy Policy. By browsing this website, you agree to our use of cookies. privacy policy
accept

Your cart

×