EURO+DRIVE for the FIAT 124 ABARTH / SPIDER

EUROCOMPULSION® is pleased to present the ultimate engine tuning system for the 124 SPIDER & ABARTH 1.4L Multiair Turbo.

The EURO+DRIVE® Tuning system has been rigorously developed and tested by EUROCOMPULSION® for the 124 ABARTH with a wide range of power-specific variations, made to meet any and all of your performance needs. 

Unlock hidden power in your vehicle by replacing conservative factory settings with more aggressive calibrations. EURO+DRIVE can be one of the first and simplest modifications to perform on your vehicle to see instant, worthwhile results.

124 ABARTH | UNLOCK YOUR POTENTIAL

Through intensive testing and development, the EURO+DRIVE Tuning system will unlock power, response, and performance overall in your FIAT 124 SPIDER. This is not just a power tune, but a comprehensive remap of all driving characteristics.

TESTING INFO

FIAT 124 ABARTH / SPIDER

VEHICLE INFO: MY2017 Fiat 124 Abarth (Manual Transmission) US Spec

MAP INFO (results shown below):       

STOCK map: 91 Octane gas, no other modifications   

PHASE 1 map: 91 Octane gas, no other modifications

PHASE 2 map: (same as above), FMIC, V4 Intake  

PHASE 3 map: (same as above) 91 octane gas, EC Upgraded Turbo

PHASE 3 Plus E85/WM map (in development):  This map is designed for those that would like to run an upgraded turbo, but will not be utilizing only pump gas, and instead a properly adjusted water/meth system or E85 with larger injectors.

EURO+DRIVE MANAGER & ONLINE PORTAL

Use your PC to easily access the EURO+DRIVE® portal to manage your tune files. Upload your ECU read files, download the latest calibrations, and update your device. All Phase 1/2 Calibrations are included in the initial purchase. Via the online portal, EC will continually offer new calibrations, updates, and revised files based on your journey with modifications and add ons.

DOES EURO+DRIVE SUPPORT MY MODIFICATIONS?

  Absolutely. EURO+DRIVE can support anything from a bone stock vehicle to a powerful, track day warrior. 

 Our team extensively tests bolt-on modifications for the best combinations in order to achieve the most effective incremental power gains, both on the road and on our dyno. Our calibrations are created and tested to support and maximize performance for all parts that we make, and more. 

These results are the foundation for the design of all our aftermarket performance parts, and the core to our Staged Upgrade Packages that help the client determine the most effective path to upgrade their vehicle. 

 Whether you decide to utilize your own modifications, or EUROCOMPULSION performance packages, the EURO+DRIVE will help you maximize your vehicle's potential.

EURO+DRIVE ADD ONs & CUSTOM TUNING

Our team creates a number of useful (or fun) tuning add on features, depending on the application. Some of these are included in your purchase, others require an additional fee. 

The EURO+DRIVE calibrations can also be custom tuned for a wide array of specialty modifications, environments, or applications. This can involve fine tuning an existing calibration, or creating a new calibration completely from scratch.

TUNE ADD ONs & FEATURES (124 SPIDER/ABARTH):

- Exhaust Pops & Bangs (Or Burbles) (additional fee applies)

- Launch Control (additional fee applies)

- CEL Elimination and Optimization for EVAP or Catless/High Catted Downpipes

- Raised Rev Limiter/Speed Limiters

- Dual Map Reprogramming to Factory Sport button or Mode Settings


CUSTOM TUNING OPTIONS (additional fees may apply):

- Custom/Upgraded Turbo

- Engine Upgrade

- E85 / Methanol / Alternative Fuel Optimization

- Larger Injectors

- Race or Track Applications (Based on Environment or Power Goals)

ADDITIONAL INFO: 

All runs (stock - P3) were tested using standard 91 octane pump gasoline and in linked/locked 4-roller configurations.  Our 124 Abarth also has the entire stock exhaust still intact on these runs. All runs listed in WHP as well as BHP (engine horsepower). The loading feature on our HLS system allows for measurement of gear ratio on each run, and measured power dissipation during pre-run procedures, as well as post run coast down measurements. This data allows the dyno software to interpolate a parasitic loss from WHP, and graph estimated engine horsepower. The BHP data is based on this dissipation measurement for each of the raw WHP run data.


We use cookies to improve your experience on our website. Read about how we use cookies in our Privacy Policy. By browsing this website, you agree to our use of cookies. privacy policy
accept

Your cart

×