Here at Eurocompulsion we have developed all new ECU tunes for the Alfa Romeo 4C. We now have over a decade of historical data on these cars both in both stock and modified configurations. This data includes our own experiences as well as customer feedback, track results and more. While looking at that data it became clear the time had come to update and improve our tunes for the 4C. They are now faster, require fewer supporting mods, and are better in every way.

We performed extensive testing on the road race track, at the dragstrip, on the dynamometer, and of course with a lot of time on real roads. We are proud to say that these tunes are better than our previous versions and I think better than any on the market.

The names are the same, but the tunes are all new.

Phase 1 is still a strong tune, but is now set up as the tune the car should have been on the car from the factory. In other words it's a cleaned up factory tune with some extra power. You will notice and appreciate the extra power but it doesn't change the character of the car.

Phase 2 is very fast and is aimed at the serious enthusiast. It now runs a 12.5 quarter-mile at 110 mph with a heavy driver on a less than ideal day. In other words, that 12.5 number is an honest reliable time you can expect to run. It ran this on normal Continental brand street tires using the stock tire sizes. Better yet, it runs this time with NO other modifications. There is no requirement for an upgraded exhaust, intercooler or intake. You just put the tune on and you will be running 12.5's in the 1/4 mile while retaining excellent street manners.

     I want to stress that this repeatable. With only the Eurocompulsion Phase 2 ECU tune and NO other modifications, the car runs in the 12.5's over and over at the drag strip. Additionally, while at our local road race track, it pulls hard down the straightaways lap after lap. 

Phase 3 is now faster as well. It requires an upgraded intercooler, but no other modifications. At this time we don't have our own drag strip test for Phase 3 but we do have a customer result and it's quite good.

    Here is the customer's time slip (left side, car 319):

As you can see, the new Phase 3 tune is running in the 12.2's at 113.7 mph.

This customer also published a video on YouTube, which may be viewed here:


     When developing the new generation of Eurocompulsion tunes we focused on track and real work usage. While the dyno is an invaluable tool for testing, they are not all that useful for comparisons from one dyno to another. Different testing methods, dyno calibrations, weather, 2wd vs. 4wd dynos and so on all combine to make these dyno to dyno comparisons almost meaningless.

     Many of our competitors post data for power at the crankshaft and not at the wheels. I understand the reasoning: the factory data is rated in engine horsepower, not wheel horsepower. Therefore, there is strong reasoning to publish engine horsepower, and we fell into that trap as well. The problem is that engine power from a chassis dyno is a calculation that's not perfectly accurate, and it's on top of the variations in wheel horsepower that are already there. From this point on when we post power results, it's going to be at the wheels to avoid any extra variables.

     We have recently recalibrated our dyno to make sure it's the most accurate dyno possible. It also has the ability to run the car with all wheels spinning, which eliminates any ABS variables from coming into play. We have standardized our dyno testing procedures in terms of temperatures and conditions which we will be using for our published results. It's one more thing we can do to eliminate variation in data from one day to another. We look forward to publishing the new dyno results, but our main focus is to demonstrate actual performance on the road and the track.

We use cookies to improve your experience on our website. Read about how we use cookies in our Privacy Policy. By browsing this website, you agree to our use of cookies. privacy policy
accept

Your cart

×