EUROCOMPULSION® is pleased to present the V2 Air Induction System (Intake) for the ALFA ROMEO GIULIA/STELVIO 2.0L Turbo. The V2 Induction Kit replaces the entire factory intake system/airbox in favor of a dual-air high flow cone filter element, utilizing our premium 4ply Silicone with KEVTEK reinforcement and construction.
Our V2 uses larger diameter transitions over the stock intake piece for increased air volume and flow. A stepped design at the turbo inlet side maintains laminar flow and reduces turbulence. The smoothed interior walls and extremely low thermal conductivity of our silicone will provide cooler and denser air to the turbo inlet increasing engine efficiency and power output. This design utilizes high-pressure ram air from the factory ducting to deliver fresh air directly to the filter while maintaining factory-provided inertial separation for debris and other unwanted materials in the filter media. Decreased restrictions allow for higher flow volume and significantly reduced pressure loss. The V2 design also allows for much louder turbo noises and audible whooshes.
The dual inlet high flow air filter uses advanced filter media that improves flow by an average of 10-12%. Our filter material uses a steel wire reinforced double-layer cotton mesh with deeper pleats than the average cone.
This as well as our other available Intakes are perfectly paired and designed with our Euro+Drive® Tuning System in mind.
FEATURES:
- Increased Power Output
- Reduced Air Intake Temperatures
- Increased Air Density at the turbo Inlet
- Reduced Pressure Losses in the intake tract
- Increased diameter transitions for more air volume
- Stepped turbo inlet design for increased laminar flow and decreased turbulence
- Maintains all factory emissions and vacuum routing
- Easy Installation, no alteration to vehicle required
- Will NOT trigger Check Engine Lights
- New Machined EVAP Venturi, W05 Compatible, NO CELS
- Increased Aesthetics
- Uses Dual Air High Flow Air filter, advanced filter media, and filtration
- Easily reversible
- Includes all necessary Clamps, Fittings, and Hoses
- World Wide Fitment for the Giulia/Stelvio 2.0L Petrol (Gasoline Engines)
APPLICATION:
- Alfa Romeo Giulia 2.0L Turbo (2017-2020)
- Alfa Romeo Stelvio 2.0L Turbo (2017-2020
TECHNICAL INFO/DYNO CHARTS: HERE
INSTALLATION INSTRUCTIONS: HERE
ALUMINUM VENTURI INSTALL: HERE
INSTALLATION VIDEO (supplemental to written instructions)
3RD PARTY INSTALL VIDEO (THANKS R&D GARAGE!)
INTAKE SOUNDS & NOISES VIDEO
Eurocompulsion cannot guarantee the success or stated power gains while using modifications not tested in house or recommended. When testing results, always follow proper dyno procedures, use appropriate fuel, and compare to vehicle specific stock deltas. Eurocompulsion is not responsible for damage caused by or incurred by other modifications or user error/installation error by user or third party. Off-Road & Race Use Only. “Not legal for sale for, or use on, pollution-controlled vehicles.” “Legal only for racing vehicles which may never be used upon a highway. Not applicable or intended for street or highway use.”
