Sale
EURO+DRIVE® TUNING SYSTEM (FIAT 124 SPIDER/ABARTH)
EURO+DRIVE® TUNING SYSTEM (FIAT 124 SPIDER/ABARTH)
EURO+DRIVE® TUNING SYSTEM (FIAT 124 SPIDER/ABARTH) - EUROCOMPULSION
EURO+DRIVE® TUNING SYSTEM (FIAT 124 SPIDER/ABARTH) - EUROCOMPULSION
EURO+DRIVE® TUNING SYSTEM (FIAT 124 SPIDER/ABARTH) - EUROCOMPULSION
EURO+DRIVE® TUNING SYSTEM (FIAT 124 SPIDER/ABARTH)
Click to zoom in

EURO+DRIVE® TUNING SYSTEM (FIAT 124 SPIDER/ABARTH)

ECU TUNING
$ 1,099.99 $ 799.99
$ 799.99

 EUROCOMPULSION® is pleased to present the ultimate engine control unit (ECU) upgrade for the FIAT 124 SPIDER/ABARTH. The EURO+DRIVE® Tuning system is available in power-specific variations and is conveniently flashed to the vehicle’s factory ECU through the OBD-II port without any physical modification to the factory ECU. The EURO+DRIVE® functionality puts the control of the engine’s operation at your fingertips and allows for comprehensive tuning calibrations that do not only affect power output but drive-ability, throttle response, consistency and smooths over-all power delivery.

EURO+DRIVE® FEATURES:

  • True OBD2 Flash Tuning/Calibrations
  • Use of Genuine OEM Software, Maps and Protocols
  • Simple User Interface (with on-line instructions)
  • Storage of 5 maps for convenient map switching (including your stock map)
  • Each Calibration is custom calibrated to your ECU specific file and VIN number
  • Calibrations will include modification calibrations
  • Calibrations will Optimize power, drive-ability, and efficiency 
  • Unparalleled consistent, linear, & smooth power delivery
  • Calibrations will retain OEM tuning logic ( IE self-adaptation) and all safety checks
  • Flashing procedure is easy, safe and protects against incomplete/incompatible flashes
  • All factory hardware works properly 
  • The EURO+DRIVE® does not hack/manipulate or bypass the factory ECU
  • Full control over all engine parameters by utilizing true factory Calibrations
  • Specially requested Calibrations available (additional fees may apply)
  • 91oct minimal fuel requirement
  • EURO+DRIVE Calibrations are street/AutoX/Track proven with an extremely high ratio of podium finishes
  • No physical removal of ECU is required
  • Launch Control/Pops and Bangs available via additional purchase

------------------------------------------------------------------------------------------------------------

EURO+DRIVE® MANAGER & PORTAL:

  • Use your PC to easily access the EURO+DRIVE® portal to manage calibration files.
  • Upload your read ECU files, download the latest calibrations, and update your device. 
  • All Phase 1/2 Calibrations are included in the initial purchase
  • Via this portal, EC will continually offer new calibrations, updates, for FREE.

------------------------------------------------------------------------------------------------------------

  • EURO+DRIVE® TECH INFORMATION: HERE
  • EURO+DRIVE® TESTING INFO: HERE
  • EURO+DRIVE® TUNE REQUIREMENTS: HERE
  • 2017+ INSTALL INSTRUCTIONS: HERE
  • INSTALL INSTRUCTIONS FOR MAC COMPUTER: HERE
  • PHASE 2 FORM: HERE (UPLOAD INTO YOUR FOLDER)
  • EURO+DRIVE® FIAT 124 TUNING GUIDE: HERE
  • EURO+DRIVE SOFTWARE: DOWNLOAD

------------------------------------------------------------------------------------------------------------

EURO+DRIVE® CALIBRATIONS:

WE CANNOT GUARANTEE THE ADVERTISED GAINS IF YOU HAVE MODS WE HAVE NOT TESTED IN HOUSE.

SUPPORTED YEARS:

  • 2017 - AVAILABLE 
  • 2018 - AVAILABLE 
  • 2019 - AVAILABLE 
  • 2020 - AVAILABLE

------------------------------------------------------------------------------------------------------------

NOTES:

  • Once your remapped ECU is installed, before turning the vehicle on for the first time, perform this procedure first:
  1. Turn ignition on for 10 seconds (no engine start)
  2. During this 10 second period, depress the gas pedal quickly 5 times.
  3. After the 10 second period is finished, turn ignition off for 10 seconds.
  4. Now you can start the engine for the first time.
  • This portion of the procedure completes the throttle self learn process, which needs to be performed anytime an ECU is re-flashed or swapped in the vehicle and is crucial to proper throttle position for correct engine operation and performance.
  • NEVER DISCONNECT THE UNIT WHILE READING/WRITING, NEVER RESET THE UNIT UNTIL DIRECTED TO DO SO. RECOVERY MODE AND UNLOCK FEES MAY RESULT.
  • Never hook the vehicle up to battery chargers or tenders during the read or writing procedure due to voltage fluctuations. This may cause errors during these processes.
  • EURO+DRIVE® Operation Times (2017+): Read (25 MIN.) Write (35MIN.
Read More
Read Less

Customer Reviews

Customer Reviews

Based on 20 reviews Write a review
We use cookies to improve your experience on our website. Read about how we use cookies in our Privacy Policy. By browsing this website, you agree to our use of cookies. privacy policy
accept

Your cart

×
×